AlfaRadio AlfaSpid Rotator and Controller Manuel d'utilisateur télécharger pdf (Page 9)



Page 9 of 20 file ~alfaspid/md-01/AlfaSpid_MD-01_Operation_15April2013_Master.doc April 15, 2013

11211 - 154 St. Edmonton, Alberta, Canada T5M 1X8 sales@alfaradio.ca 780 466 5779 www.alfaradio.ca

Calibration mode (MOTOR ANGLES)

To switch the controller to the calibration mode, use the [F] button.

In this mode you can set the azimuth and elevation angles without

turning the antenna. This mode is needed to preset and calibrate the

antenna positions.

To set the azimuth angle to zero, push the [F1] and [Left] buttons

simultaneously. To set the elevation angle to zero, push the [F1]

and [Down] buttons simultaneously.

To set any azimuth angle use the buttons [Left] and [Right].

To change the elevation angle use the buttons [Up] and [Down].

After completing the calibration you need to leave the calibration

mode and come back to the normal mode by pushing the [F] button.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 19 20

Pas de commentaire

AlfaRadio AlfaSpid Rotator and Controller Manuel d'utilisateur Page 9